Baumer VCXG Series - Eventselector; Losteventcounter

V4.7 | 06/24/2024 | 11165414
143
7.10.2 EventSelector
Selects which Event to signal to the host application.
Name EventSelector
Category EventControl
Interface IEnumeration
Access Read / Write
Unit -
Values see table below
VCXG / .XC / .PTP VCXG.I / .I.XT / .PTP VCXU
DeviceTemperatureStatus-
Changed (≥ Rel. 2)
DeviceTemperatureStatus-
Changed (≥ Rel. 2)
DeviceTemperatureStatus-
Changed (≥ Rel. 2)
EventLost EventLost EventLost
ExposureEnd ExposureEnd ExposureEnd
ExposureStart ExposureStart ExposureStart
FrameEnd FrameEnd FrameEnd
FrameStart FrameStart FrameStart
FrameTranferSkipped FrameTranferSkipped FrameTranferSkipped
Error Error -
GigEVisionHeartbeatTime-
Out
GigEVisionHeartbeatTime-
Out
-
Line0..3 FallingEdge Line0..7 FallingEdge Line0..3 FallingEdge
Line0..3 RisingEdge Line0..7 RisingEdge Line0..3 RisingEdge
PrimaryApplicationSwitch PrimaryApplicationSwitch -
PtpServoStatusChanged* PtpServoStatusChanged* -
PtpStatusChanged* PtpStatusChanged*
Notice
There is a possibility that a large number of events
PtpStatusChanged will be issued as long as PtpSer-
voStatus
≠ Locked.
-
TransferBu󰀨erFull TransferBu󰀨erFull TransferBu󰀨erFull
TransferBu󰀨erReady TransferBu󰀨erReady TransferBu󰀨erReady
TriggerOverlapped TriggerOverlapped TriggerOverlapped
TriggerReady TriggerReady, TriggerReady
TriggerSkipped TriggerSkipped TriggerSkipped
*)
.PTP only
7.10.3 LostEventCounter
Counts lost events.
Name LostEventCounter
Category EventControl
Interface IInteger
Access Read only
Unit -
Values 0 ... 9223372036854775807 (Increment: 1)