Baumer VCXG Series - Gainauto (Except.PTP;.I.PTP); Gainselector

V4.7 | 06/24/2024 | 11165414
84
7.2.5 GainAuto (except .PTP / .I.PTP)
Sets the automatic gain control (AGC) mode. The exact algorithm used to implement AGC
is device-specic.
Name GainAuto
Category AnalogControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Continuous Gain is constantly adjusted by the device.
O󰀨 Gain is User controlled using Gain.
Once
Gain is automatically adjusted once by the device. Once
it has converged, it automatically returns to the O󰀨 state.
The levelling can take several images.
7.2.6 GainSelector
Selects which gain is controlled by the various gain feature.
Name GainSelector
Category AnalogControl
Interface IEnumeration
Access Read / Write
Unit -
Values
All Gain will be applied to all channels or taps.
Blue
Gain will be applied to the blue channel.
(only color cameras)
GreenBlue
Gain will be applied to the green blue channel.
(only color cameras)
GreenRed
Gain will be applied to the green red channel.
(only color cameras)
Red
Gain will be applied to the red channel.
(only color cameras)