Baumer VCXG Series - Sequencerconfigurationmode; Sequencerfeatureenable

V4.7 | 06/24/2024 | 11165414
190
Sequencerconguration
In order to avoid overwriting current camera settings while conguring a sequencer, the
camera needs to be set to the sequencer conguration mode.
Once the camera is set to the sequencer conguration mode, the individual sequencer
sets can be selected via the SequencerSetSelector, congured and saved by executing
SequencerSetSave.
Starting the congured sequence requires to switch the sequencer conguration mode o󰀨
and to enable the sequencer mode.
7.15.1 SequencerCongurationMode
Controls if the sequencer conguration mode is active.
Name SequencerCongurationMode
Category SequencerControl
Interface IEnumeration
Access Read / Write
Unit -
Values
On
Enables the sequencer conguration mode.
O󰀨 Disables the sequencer conguration mode.
7.15.2 SequencerFeatureEnable
Enables the selected feature and make it active in all the sequencer sets.
Name SequencerFeatureEnable
Category SequencerControl
Interface IBoolean
Access Read only
Unit -
Values
true = 1 (On)
false = 0 (O󰀨)