Baumer VCXG Series - Acquisitionstop; Exposureauto (Except.PTP;.I.PTP); Exposuremode

V4.7 | 06/24/2024 | 11165414
68
7.3.9 AcquisitionStop
Stops the Acquisition of the device at the end of the current Frame.
Name AcquisitionStop
Category AcqusitionControl
Interface ICommand
Access Write only
Unit -
Values -
7.3.10 ExposureAuto (except .PTP / .I.PTP)
Sets the automatic exposure mode when ExposureMode is Timed. The exact algorithm
used to implement this control is device-specic.
Notice
For rolling shutter cameras, the function is only available in Sensor Shutter Mode: Roll-
ing Shutter.
Name ExposureAuto
Category AcqusitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Continuous
Exposure duration is constantly adapted by the device to
maximize the dynamic range.
O󰀨
Exposure duration is user controlled using Exposure-
Time.
Once
Exposure duration is adapted once by the device. Once
it has converged, it returns to the O󰀨 state.
7.3.11 ExposureMode
Sets the operation mode of the Exposure (or shutter).
Name ExposureMode
Category AcqusitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values Timed
Timed exposure. The exposure duration time is set using the
ExposureTime or ExposureAuto features and the exposure
starts with the FrameStart or LineStart.