EasyManua.ls Logo

Baumer VCXG Series - Page 97

Baumer VCXG Series
238 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
V4.7 | 06/24/2024 | 11165414
97
Release 2
Feature Description
Binning (subordinate features only together selectable)
BinningHorizontal Number of horizontal photo-sensitive cells to combine
together.
BinningHorizontalMode Mode of Binnings Horizontal
BinningSelector Where the Binning is calculated.
Region 0 (Binning is calculated in FPGA)
Sensor (Binning is calculated in Sensor)
BinningVertical Number of vertical photo-sensitive cells to combine
together.
BinningVerticalMode Mode of Binnings Horizontal
BlackLevel Returns the black level used to capture the image includ-
ed in the payload.
DeviceTemperature Device temperature in degrees Celsius (C). It is measured
at the location selected by DeviceTemperatureSelector.
ExposureTime Returns the exposure time used to capture the image.
FrameID
Returns  the  unique  Identier  of  the  frame  (or  image) 
included in the payload.
Gain Returns the gain used to capture the image.
Height Returns the height of the image included in the payload.
Image Transmits the Image data in chunk block.
ImageControl (subordinate features only together selectable)
BrightnessCorrection
On/O󰀨 for the Brightness Correction.
DefectPixelCorrection On/O󰀨 the correction of defect pixels.
LUTSelector Selects the Chunk LUT.
LUTEnable
On/O󰀨 the selected LUT.
ReverseX On/O󰀨 Flip horizontally the image sent by the device. The 
Region of interest is applied after the ipping
ReverseY On/O󰀨 Flip  vertically  the image sent by the device. The 
Region of interest is applied after the ipping.
LineStatusAll Returns the current status of all available Line signals at
time of polling in a single biteld.
O󰀨setX Horizontal o󰀨set from the origin to the area of interest (in 
pixels).
O󰀨setY
Vertical  o󰀨set  from  the  origin  to  the  area  of  interest 
(in pixels).
PixelFormat Returns the pixel format of the image included in the pay-
load.
Timestamp Returns the Timestamp of the image included in the pay-
load at the time of the FrameStart internal event.
Width Returns the width of the image included in the payload.

Table of Contents

Related product manuals