About MC6-T - 27
Note: Auto-off is not active when calibrator is in use.
The startup procedure ends in Home View. From MC6-T's Home View
you may advance to any of the available main operational modes. This
manual contains detailed information about main operational modes as
follows:
• Temperature Calibrator,
• Calibrator,
• Documenting Calibrator,
• Data Logger,
• Communicator and
• Settings.
Figure 9: Home view
Figure 10: Power button (left) and Home button (right)
With the Home button you can always return to Home View from
wherever you are.
To Next Page