Need help?Do you have a question about the biosystems A25 and is the answer not in the manual?
General| Brand | biosystems |
|---|---|
| Model | A25 |
| Category | Measuring Instruments |
| Language | English |
Details the operating arm mechanism, its axes, motors, and guiding chains.
Explains the components of the dispensing system, including the pump and needle.
Describes the thermostated rotor, heating channel, Peltier cells, and photometric system.
Describes the CPU board as the analyzer's brain, containing the microprocessor and memory.
Explains the power supply board with its voltage regulators and LED indicators.
Explains how to initialize the analyzer in service mode, requiring user login credentials.
Describes how to make parameter adjustments for correct analyzer functioning.
Adjusts the needle's dispensing temperature to be close to 37ºC.
Adjusts the rotor's thermostation to maintain reactions at 37ºC.
Adjusts the horizontal (X, Y) and vertical (Z) positioning of the operating arm.
Introduces tests for checking analyzer component functionality.
Checks the correct functioning of all analyzer motors step by step.
Tests the functioning of the optical system.
Lists various technical utilities accessible from the service program.
Provides instructions for removing and replacing the dispensing needle.
Provides step-by-step procedures for preventive maintenance and repair.
Lists recommended weekly and annual preventive maintenance actions.
To Next Page