biosystems A25 - Loss Step Test; Stress Mode Test

74
Service manual
4.3.1.3. Loss step test
This test makes it possible to check if a motor misses steps when performing a certain sequence of movements.
The test can be carried out with the speed and acceleration used in the normal functioning of the analyzer or with
these magnitudes increased by 10% to check the functioning safety margin.
4.3.1.4. Stress mode test
This test makes it possible for a certain sequence of movements to be performed continually. The technician can
program the duration of the test, which can be cancelled at any moment. Depending on the motor selected, there