Service manual
142
A V. SOFTWARE VERSIONS
Change in the versions of service program
Date version Change
3/06/03 1.3 First versions
14/04/03 1.3.2 Corrections
4/06/04 2.0.0 Improve the rotor verification test
Improve some display screen
Improve the test/change lamp
New screen: save and load the file adjustments
New initialitation screen. shows the state information of the analyser
09/07/04 2.5.0 Change the sensibility adjust
20/03/06 3.0.0 New adjustment: adjust the maximum sweep of the z axis
New test of the maximum sweep of the z axis
Improve the level detection test
Improve the photometric test
Improve the stress test
New user’s menu
Improve the read/load adjustment and cycles
28/06/06 3.0.2 Correction of errors
Improve the checking before load a new firmware
Change in the versions of user program
Date version Changes
24/07/03 1.4.0 First version
14/11/03 1.4.1 Corrections and new languages implemented, russian
27/11/03 1.4.2 Corrections
10/02/04 2.0.0 New funtionality: Sat report
Importr/ exportr sesions
PC-host (LIMS) module
Possibility to create different users levels
Add sound alarm
8/07/04 2.5.0 New contamination file
Possibility to modify the factor by the user
USB connection
Use different type of rack with the racks deteccion activate
Change in the rotor verification test
28/01/05 3.0.0 Automatic repetition
Printed automatic final reports
Cancel samples patient and test
Delete blanks and standards
Improve the downcounting time
Possibility to save test in a file
Improve turbidimetry test
Start running automaticaly after doing a New rotor
New Button in monitor screen shows the preparation/well
Read patient code with barcode reader
Corrections
13/09/05 3.1.1 Calculated test
New programming test options:
Decreasing calibrations curve
Reactive blank with saline solution
New type of sample: Whole blood
To Next Page
Loading...
Need help?
General