65
4.2. ADJUSTMENTS
These make it possible to make different parameter adjustments required for the correct functioning of the analyzer.
All the values to be adjusted have certain limited ranges, indicated by the service program. These values are also
given in an appendix at the back of this manual. If, after varying any of the parameters within its permitted range,
the analyzer is not tuned up, it indicates that the corresponding system is broken and in need of repair.
4.2.1. Adjustment of the needle thermostatation system
This screen adjusts the needle thermostatation in such a way that the dispensing temperature of the reactions is
as close as possible to 37ºC. To make this adjustment, the analyzer must be initialised. The liquid to be dispensed
To Next Page
Loading...
Need help?
General