1.2.3 About this documentation
Purpose
Personal injury and property damage caused
by improper project planning for applications,
machines and installations!
Observe the contents of the documentation relevant to your drive system
(see chapter "Documentations" on page 25).
This documentation contains the following:
● Overview of the Rexroth IndraDrive Cs system
● Description of the allowed combinations of Rexroth IndraDrive Cs sys‐
tem components
● Selection of the system components of the Rexroth IndraDrive Cs sys‐
tem
● Specification applying to all components (ambient and operating condi‐
tions)
● Application description of system characteristics
Editions
Edition Notes
05 Changes in comparison to previous edition:
Revised contents
● Added technical data (inverter power section) for HCS01.1E-W0013
● Analog current input (DA option): Updated electrical data
04 Changes in comparison to previous edition:
New contents
● External braking resistors:
– HLR01.2N-0K06-N100R-E-003-NNNN
– HLR01.2N-0K06-N180R-E-007-NNNN
● SB option (Safe Motion Bus)
● EP option (Engineering interface)
● SUP-E02-MSM-BATTERYBOX-xxxx battery box accessory
● Encoder cable for MSM motors with M5 absolute value encoder (RKG0065)
Revised contents
● Updated type code
● HCS01.1E-W0018-A02 (inverter data): Frequency-dependent output currents
● HAS09.1-001 (module bus cable shield connection) accessory
● Updated encoder emulation data
● Removed HAP01.1E standard control panel
Bosch Rexroth AG DOK-INDRV*-HCS01******-PR05-EN-P22/341
Rexroth IndraDrive CsDrive Systems with HCS01
System presentation
To Next Page
Loading...
