Bosch Rexroth IndraDrive CsDrive System with HCS01 - Compatibility with Foreign Matters; Mechanical Project Planning; Drive Controller; Dimensional Drawings

Description Symbol Unit
HCS01.1E
-W0003-
_-02
HCS01.1E
-W0006-
_-02
HCS01.1E
-W0009-
_-02
HCS01.1E
-W0013-
_-02
HCS01.1E
-W0018-
_-02
Output voltage
V
out
V 3 x AC 0...230
Output current
I
out
A 1.1 2.0 3.0 4.5 7.6
Last modification: 2012-01-23
1) Mains input L1, L2, L3 (for HMV and HCS only); For use on a
solidly grounded wye source only.
Tab. 4-15: HCS - Ambient and operating conditions - UL ratings
Ambient and operating conditions – UL ratings
Description Symbol Unit
HCS01.1E
-W0005-
_-03
HCS01.1E
-W0008-
_-03
HCS01.1E
-W0018-
_-03
HCS01.1E
-W0028-
_-03
HCS01.1E
-W0054-
_-03
Short circuit current rating SCCR A rms 42000
Rated input voltage, power
1)
U
LN_nom
V 3 x AC 200...500
Rated input current
I
LN
A 1.5 2.5 5.0 10.0 28.0
Output voltage
V
out
V 3 x AC 0...500
Output current
I
out
A 1.7 2.7 7.6 11.5 21.0
Last modification: 2013-01-10
1) Mains input L1, L2, L3 (for HMV and HCS only); For use on a
solidly grounded wye source only.
Tab. 4-16: HCS - Ambient and operating conditions - UL ratings
4.4.4 Compatibility with foreign matters
All Rexroth controls and drives are developed and tested according to the
state-of-the-art technology.
As it is impossible to follow the continuing development of all materials (e.g.
lubricants in machine tools) which may interact with the controls and drives, it
cannot be completely ruled out that any reactions with the materials we use
might occur.
For this reason, before using the respective material a compatibility test has
to be carried out for new lubricants, cleaning agents etc. and our housings/
materials.
4.5 Mechanical project planning
4.5.1 Drive controller
Dimensional Drawings
Options for Mounting
● Standard mounting:
The back of the device is directly mounted to the mounting surface in
the control cabinet
● Left-hand or right-hand mounting:
The left or right side of the device is directly mounted to the mounting
surface in the control cabinet
DOK-INDRV*-HCS01******-PR05-EN-P Bosch Rexroth AG 59/341
Rexroth IndraDrive CsDrive Systems with HCS01
Combining the individual components