3.4 Explanation of signal words and the Safety alert symbol
The Safety Instructions in the available application documentation contain
specific signal words (DANGER, WARNING, CAUTION or NOTICE) and,
where required, a safety alert symbol (in accordance with
ANSI Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruc‐
tion and identifies the hazard severity.
The safety alert symbol (a triangle with an exclamation point), which pre‐
cedes the signal words DANGER, WARNING and CAUTION, is used to alert
the reader to personal injury hazards.
In case of non-compliance with this safety instruction, death or serious injury
will occur.
In case of non-compliance with this safety instruction, death or serious injury
could occur.
In case of non-compliance with this safety instruction, minor or moderate in‐
jury could occur.
In case of non-compliance with this safety instruction, property damage could
occur.
Bosch Rexroth AG DOK-INDRV*-HCS01******-PR05-EN-P40/341
Rexroth IndraDrive CsDrive Systems with HCS01
Safety instructions for electric drives and controls
To Next Page
Loading...
Need help?
General