BradyPrinter S3100 Sign & Label Printer User’s Manual
143
GHS (CLP)
Open, Save or Delete an RTK Label
17. There are other fields on the label where you can add custom data. These
fields are designated by brackets < >. To add the suggested custom
information:
a. On the label, touch the desired custom field (inside the brackets).
b. A dialog box displays where you can enter the requested information.
c. Touch the desired data field and enter the data.
d. When finished with the particular data screen, touch the OK button.
18. Touch an empty diamond on the label to add a graphic.
a. Graphics are organized by category. Touch Change Category and the
select the category from which you need a graphic. Touch the OK button.
b. Touch the graphic that you want to use. You may need to touch the right
and left arrow keys to scroll through all the graphics in the selected
category.
c. Touch the Finish button.
19. When finished with the entire label, touch the Finish button.
Note: If the Finish button is not available, make sure that the product name is
entered, that at least one hazard or precaution statement is selected, and that
the graphics have been specified.
To Next Page
Loading...
Need help?
General
