BradyPrinter S3100 Sign & Label Printer User’s Manual
16
Using Your Printer with a PC
Configuring the Printer for Network Communication
6. Fill in the following addressing fields if you selected Static. Tap the field, type
the address, and then touch the OK button.
•
IP Address:
Enter the printer’s IP address.
•
Subnet Mask:
Enter a subnet mask if you are using one.
•
Default Gateway:
Enter the IP address of the default gateway.
•
DNS Server (Primary):
Enter the IP address of the primary DNS server. (Optional)
•
DNS Server (Secondary):
Enter the IP address of the secondary DNS
server. (Optional)
Configuring a Wi-Fi Connection
If configuring an enterprise network connection, you will need authentication
certificate files in the root directory of a portable USB storage device (also known
as a memory stick or thumb drive).
Note: Wi-Fi capability is not available on all printers or in all countries.
1. Touch the Menu button at the top of the home screen.
2. Touch the Setup button.
3. On the System Setup dialog, touch Network.
4. Touch Wi-Fi.
5. Next to Wi-Fi Connection, select the Enabled check box. The printer
searches for Wi-Fi networks and displays a list of networks found.
Note: Enabling the Wi-Fi Connection will make the Wi-Fi Address and Wi-Fi
Direct tabs visible.
Note: If the printer is already configured for Wi-Fi but you want to change
networks touch the Disconnect button. If you don’t see the desired Wi-Fi in the
list, touch Refresh. The printer will search for available networks and update
the list.
6. In the Wi-Fi Network list, touch the network to which you want to connect. In
the pane to the right of the list, touch Connect.
7. Enter the network password and any other requested information depending
on the type of network.
•
Network Name (SSID):
This field is display-only unless you chose
Others
for
the network.
•
Security:
This field is display-only unless you chose
Others
for the network.
Enter the type of security used for the network. For example, WEP64 or WPA
TKIP.
•
Authentication Type:
This field is only visible for enterprise networks. Touch
Select.
A list opens. Touch the type of authentication and then touch the OK
button.
To Next Page
Loading...
Need help?
General
