Brother MFC-J6510DW

3-36
Confidential
[ 3 ] Disconnecting Cables and Removing Accessories
(1) Disconnect the following:
- Power cord from the electrical outlet (or from the machine in the case of 200 V models)
- Modular jack of the telephone line
- USB cable, if connected
- LAN cable, if connected (if not connected, remove the LAN cap)
- USB digital camera cable or USB flash memory drive, if connected
- Modular jack of the external telephone set from the external telephone line jack, if
connected (if not connected, remove the EXT cap)
(2) Remove the paper tray ASSY #1 (and ASSY #2).
(3) Remove memory cards if inserted in the machine.
(4) Open the ink cartridge cover, remove all four ink cartridges, and set the protective part
instead. Check that the right-hand latch fits in the hole provided in the ink refill ASSY.
Telephone line cord
(3_001)
EXT cap
Paper tray ASSY #1
Paper tray ASSY #2
Protective
cap
Power cord
200 V series
LAN USB
Protective part
(3_002)