Brother MFC-J6510DW

2-58
Confidential
 Error Code E2
Wired MAC address not registered.
Error Code E3
Wireless MAC address not registered.
User Check
Enter the wired/wireless MAC address again.
 Error Code E5
This error does not occur under normal use. It is considered to be caused by electrical noise in
the vicinity of the machine, power voltage fluctuation, or software failure.
Unidentifiable error.
User Check
- Unplug the power cord, wait a while, and plug the power cord again to turn the power ON.
 Error Code E6
Write error in EEPROM.
MACHINE ERROR E2
LCD
MACHINE ERROR E3
LCD
Step Cause Solution
1 Main PCB defective Replace the main PCB ASSY.
MACHINE ERROR E5
LCD
Step Cause Solution
1 Main PCB defective Replace the main PCB ASSY.
Unable to Init. E6
LCD
Step Cause Solution
1 Main PCB defective Replace the main PCB ASSY.