Brother MFC-J6510DW

2-57
Confidential
 Error Code BF
During the second side scanning in the ADF, a document longer than the specified limit is
detected.
User Check
- Check whether the document scanned is longer than the specified limit.
 Error Code DF
SDAA failure.
Error Code E0
Modem cannot start up normally even after reset.
Document Jam / Too long
LCD
Step Cause Solution
1
Document scanning position
detection actuator (for second side
scanning) caught on the
surrounding parts
Reposition the actuator.
2 Connection failure of the
document scanning position
sensor harness (for second side
scanning)
Check the connection and reconnect the harness.
3
Document scanning position
sensor (for second side scanning)
defective
Replace the document scanning position sensor PCB
(for second side scanning).
4 ADF motor defective Replace the ADF motor.
5
Main PCB defective
Replace the main PCB ASSY.
Unable to Init. DF
LCD
Unable to Init. E0
LCD
Step Cause Solution
1
Main PCB defective
Replace the main PCB ASSY.