Brother MFC-J6510DW

4-39
Confidential
If restoring of the machine information ends successfully, [ 9 ] to [ 12 ] and [ 16 ] are not required.
[ 9 ] Acquire white level data and set CIS scanner area (Function code 55)
Refer to Chapter 5, Section 5.1.4.15.
[ 10 ] Update the paper feeding correction value (Function code 58)
Refer to Section 4.1 [ 5 ].
[ 11 ] Align vertical print lines (Function code 65)
Refer to Section 4.1 [ 7 ].
[ 12 ] Adjust margins in borderless printing (Function code 66)
Refer to Section 4.1 [ 8 ].
[ 13 ] Create head calibration data and write it into flash ROM (Function code 02)
Refer to Section 4.1 [ 9 ].
If restoring of head calibration data ends successfully in [ 6 ] above, this procedure is not
required.
[ 14 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning
Refer to Section 4.3 [ 1 ].
[ 15 ] Print out a total quality check pattern
Refer to Section 4.1 [ 10 ].
[ 16 ] Adjust the touch panel (Function code 78) (For models with touch panel)
Refer to Chapter 5, Section 5.1.4.29.
[ 17 ] Switch back to standby
Refer to Section 4.1 [ 11 ].