4-5
Confidential
[ 2 ] Clean the new head/carriage unit (Function code 76)
(1) Open the ink cartridge cover, set comparatively-new ink cartridges (having sufficient ink)
into the ink refill ASSY, and close the ink cartridge cover.
(2) Carry out a purge operation (with function code 76) using the steps below. (See Chapter 5,
Section 5.1.4.27.)
Press the 7 and 6 keys in this order.
The machine displays "CLEANING ALL" on the LCD and enters the purge mode.
Press the 4 and Black Start (Mono Start) keys in this order to start an initial purge.
The machine starts an initial purge that refills the ink supply tubes and the print head with
fresh ink.
To Next Page
Loading...
