2-59
Confidential
Error Code E7
This error does not occur under normal use. It is considered to be caused by electrical noise in
the vicinity of the machine, power voltage fluctuation, or software failure.
Unidentifiable error.
User Check
- Unplug the power cord, wait a while, and plug the power cord again to turn the power ON.
Error Code EA
Document removed at phase B. (Detected by the document detection sensor)
User Check
Send a fax again.
Error Code EC
LCD failure.
MACHINE ERROR E7
LCD
Step Cause Solution
1 Main PCB defective Replace the main PCB ASSY.
Document Jam
LCD
Step Cause Solution
1 Main PCB defective Replace the main PCB ASSY.
Unable to Init. EC
LCD
Step Cause Solution
1 LCD flat cable connection failure Check the connection and reconnect the flat cable.
2 LCD defective Replace the LCD unit.
3 Main PCB defective Replace the main PCB ASSY.
To Next Page
Loading...
