Brother MFC-J6510DW

5-64
Confidential
(3) To stop this operation and return the machine to the initial stage of the maintenance mode,
press the Stop/Exit key.
In the following notes, the OK key is used. For models having no OK key on the control panel,
use the PHOTO CAPTURE key instead of the OK key.
*1 With the S/N being displayed, pressing the OK key shows the serial number of the
machine.
The serial number of the machine can be changed with the following procedure.
1) With the serial number being displayed, press the OK key and then press the 9, 4, 7 and 5
keys in this order.
The uppermost digit of the current serial number flashes.
2) Enter the uppermost digit of the desired serial number with numerical keys, then press the
key to move the cursor to the next lower digit. In the same way, enter the remaining 14
digits.
Entry of alphabet letters
To enter an alphabet letter, press the corresponding numerical key repeatedly until the target
alphabet letter appears.
3) Upon completion of entry of all digits, press the OK key.
The machine saves the newly entered setting and returns to the initial stage of the
maintenance mode.
To cancel the entry of a serial number halfway through the above procedure, press the Stop
key. The machine returns to the initial stage of the maintenance mode.
*2 "CISF:**" on the simplex scanning models; "CISF:** CISA:**" on the duplex scanning
models
CISF: First side scanning
CISA: Second side scanning
*3 With the PictBridge information being displayed, pressing the OK key cycles through the
following items.
S/N: Serial Number information
************** Serial number of the machine
Numerical keys Letters supported
22 → A → B → C
33 → D → E → F
44 → G → H → I
55 → J → K → L
66 → M → N → O
77 → P → Q → R → S
88 → T → U → V
99 → W → X → Y → Z
PICTBRIDGE: PictBridge information
BROTHER Vendor name
***-***** Model name
**/** Profile version/DPS version (not required for servicing)
BR0000** PictBridge serial number (not required for servicing)