2-12
Confidential
Error
Code
Contents
Refer to
page:
8A PF encoder cannot detect the rotation of the paper feed roller. 2-50
8B PF encoder detects an abnormal stop of the paper feed roller. 2-50
8C
Driver IC overcurrent protection activated during running of the paper feed
motor.
2-51
8F Paper feed motor cannot stop. 2-51
A1 Scanner cover (scanner unit) opened. 2-52
A2 In ADF scanning, a document of 90 cm or longer is detected. 2-52
A3
The document scanning position sensor (for first side scanning) or the one (for
second side scanning) does not come ON during ADF scanning.
2-53
A4 ADF cover opened. 2-54
A5 Fax scanning failure by the first side scanning CIS (1st time). 2-54
A6 Fax scanning failure by the first side scanning CIS (retry). 2-54
A7 Mismatch between actual CIS type and EEPROM data. 2-55
A8 Color parameter matching error. (Used for monitoring bugs at the factory.) 2-55
AC Fax scanning failure by the second side scanning CIS (1st time). 2-55
AF Positioning error of the first side scanning CIS. (Home positioning failed) 2-56
BC Fax scanning failure by the second side scanning CIS (retry). 2-56
BD Black level data error in flat-bed scanning. 2-56
BF
During the second side scanning in the ADF, a document longer than the
specified limit is detected.
2-57
DF SDAA failure. 2-57
E0 Modem cannot start up normally even after reset. 2-57
E2 Wired MAC address not registered. 2-58
E3 Wireless MAC address not registered. 2-58
E5 Unidentifiable error. 2-58
E6 Write error in EEPROM. 2-58
E7 Unidentifiable error. 2-59
EA Document removed at phase B. (Detected by the document detection sensor) 2-59
EC LCD failure. 2-59
ED Touch panel initialization failed. 2-60
F8 Battery harness connection failure. 2-60
FE ROM data acquisition error. 2-60
To Next Page
Loading...
