EasyManua.ls Logo

BRP ROTAX 916 i A Series - Page 2

BRP ROTAX 916 i A Series
223 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Before starting with engine installation, please read the
Installation Manual completely as it contains important
safety relevant information.
This Installation Manual for the ROTAX® aircraft engines
should only be used as a general installation guide for the in-
stallation of ROTAX® engines into airframes. It should not be
used as instruction for the installation of a ROTAX® aircraft
engine in a specific type of airframe or
airplane. BRP-Rotax GmbH & Co KG does not assume any
warranty or liability in this context.
In no event shall the Installation Manual be used without fol-
lowing the specific instructions and/or requirements of the
manufacture of an airframe or airplane (“Manufacturer”). For
verification and/or for release of the engine installation, the
respective Manufacturer must be contacted. Any modifica-
tions or adaptations to the airframe or airplane shall be car-
ried out and/or be verified and released by the Manufacturer
only.
Improper use of the Installation Manual and/or non compli-
ance with the installation requirements of the Manufacturers
can cause personal injury or property damage. BRP-Rotax
GmbH &
Co. KG disclaims any liability for any and all damage
and/or
injuries (including death) resulting from the improper
use of Installation Manual and non compliance with the ins-
tallation requirements of the Manufacturer.
WARNING
These technical data and the information embodied therein
are the property of BRP-Rotax GmbH & CO KG, Austria, acc,
BGBI 1984 no. 448, and shall not, without prior written per-
mission of BRP-Rotax GmbH & Co KG, be disclosed in whole
or in part to third parties. This legend shall be included on
any reproduction of these data, in whole or in part. The Manu-
al must remain with the engine/aircraft in case of sale.
Copyright 2023 © - all rights reserved.
Translation into other languages might be performed in
the course of language localization but does not lie within
ROTAX® scope of responsibility.
In any case the original text in English language and the me-
tric units are authoritative.

Table of Contents

Other manuals for BRP ROTAX 916 i A Series

Related product manuals