EasyManua.ls Logo

Campbell CR850 - Figure 124: Loosening Retention Nuts; Table 105. Internal Lithium-Battery Specifications

Campbell CR850
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 9. Maintenance
398
o Time. Clock will need resetting when the battery is replaced.
o Final-storage data tables.
A replacement lithium battery (pn 13519) can be purchased from Campbell
Scientific or another supplier. Table Internal Lithium-Battery Specifications
(p. 398)
lists battery specifications.
Table 105. Internal Lithium-Battery Specifications
Manufacturer Tadiran
Model TL-5902S (3.6 V)
Capacity 1.2 Ah
Self-discharge rate 1%/year @ 20°C
Operating temperature range -55°C to 85°C
When reassembling the module to the wiring panel, assure that the module is fully
seated or connected to the wiring panel by firmly pressing them together by hand.
Figure 124: Loosening retention nuts
Fully loosen the two knurled thumbscrews. Only loosen the screws. They will
remain attached to the module.

Table of Contents

Related product manuals