Campbell CR850 - Inmarsat-C; User Defined Functions

Appendix A. CRBasic Programming Instructions
503
OmniSatSTSetup
SetsuptheOMNISATtransmittertosenddataovertheGOESorMETEOSAT
satelliteataself‐timedtransmissionrate.
Syntax
OmniSatSTSetup(ResultCodeST, ResultCodeTX, OmniPlatformID,
OmniMsgWindow, OmniChannel, OmniBaud, STInterval,
STOffset)
A.20.4 INMARSAT-C
INSATData
SendsatableofdatatotheOMNISAT‐Itransmitterfortransmissionviathe
INSAT‐1satellite.
Syntax
INSATData(ResultCode, TableName, TX_Window, TX_Channel)
INSATSetup
ConfigurestheOMNISAT‐ItransmitterforsendingdataovertheINSAT‐1
satellite.
Syntax
INSATSetup(ResultCode, PlatformID, RFPower)
INSATStatus
Queriesthetransmitterforstatusinformation.
Syntax
INSATStatus(ResultCode)
A.21 User Defined Functions
Function/EndFunction
Createsauser‐definedfunction.
Syntax
Function [optional parameters] As [optional data type]
Return [optional expression]
ExitFunction [optional]
EndFunction