Campbell CR850 User Manual

Appendix A. CRBasic Programming Instructions
501
LoadFieldCal
LoadsvaluesfromtheFieldCalfileintovariablesinthedatalogger.
Syntax
LoadFieldCal(CheckSig)
NewFieldCal
TriggersstorageofFieldCalvalueswhenanewFieldCalfilehasbeenwritten.
Syntax
DataTable(TableName, NewFieldCal, Size)
SampleFieldCal
EndTable
SampleFieldCal
StoresthevaluesintheFieldCalfiletoadatatable.
Syntax
DataTable(TableName, NewFieldCal, Size)
SampleFieldCal
EndTable
A.20 Satellite Systems
Instructions for GOES, ARGOS, INMARSAT-C, OMNISAT. Refer to satellite
transmitter manuals available at www.campbellsci.com.
A.20.1 Argos
ArgosData
SpecifiesthedatatobetransmittedtotheArgossatellite.
Syntax
ArgosData(ResultCode, ST20Buffer, DataTable, NumRecords,
DataFormat)
ArgosDataRepeat
SetstherepeatratefortheArgosDatainstruction.
Syntax
ArgosDataRepeat(ResultCode, RepeatRate, RepeatCount,
BufferArray)
ArgosError
Sendsa"GetandClearErrorMessage"commandtothetransmitter.
Syntax
ArgosError(ResultCode, ErrorCodes)
ArgosSetup
SetsupthedataloggerfortransmittingdataviaanArgossatellite.
Syntax
ArgosSetup(ResultCode, ST20Buffer, DecimalID, HexadecimalID,
Frequency)

Campbell CR850 Specifications

General

Brand	Campbell
Model	CR850
Category	Measuring Instruments
Language	English