Campbell CR850 - Information Services

Appendix A. CRBasic Programming Instructions
496


TableName.Output
Determineifdatawaswrittentoaspecificdatatablethelasttimethedatatable
wascalled.
Syntax
TableName.Output(1,1)
TableName.Record
Determinestherecordnumberofaspecificdatatablerecord.
Syntax
TableName.Record(1,n)
TableName.TableFull
Indicateswhetherafill‐and‐stoptableisfullorwhetheraring‐modetablehas
begunoverwritingitsoldestdata.
Syntax
TableName.TableFull(1,1)
TableName.TableSize
Returnsthenumberofrecordsallocatedforadatatable.
Syntax
TableName.TableSize(1,1)
TableName.TimeStamp
Returnsthetimeintoanintervaloratimestampforarecordinaspecificdata
table.
Syntax
TableName.TimeStamp(m,n)
WorstCase
Savesoneormore"worstcase"datastorageeventsintoseparatetables.Usedin
conjunctionwithDataEvent().
Syntax
WorstCase(TableName, NumCases, MaxMin, Change, RankVar)
A.16 Information Services
These instructions address use of email, SMS, Web Pages, and other IP services.
These services are available only when the CR800 is used with network link-
devices that have the PPP/IP key enabled, i.e., when the CR800 IP stack is used.
See the appendix Network Links
(p. 545).
Read More! See Information Services
(p. 167).
DHCPRenew
RestartsDHCPontheethernetinterface.
Syntax
DHCPRenew