Campbell CR850 - Page 491

Appendix A. CRBasic Programming Instructions
491
Route
Returnstheneighboraddressof(ortherouteto)aPakBusdatalogger.
Syntax
variable = Route(PakBusAddr)
RoutersNeighbors
ReturnsalistofallPakBusroutersandtheirneighborsknowntothedatalogger.
Syntax
RoutersNeighbors( DestArray(MaxRouters, MaxNeighbors+1))
Routes
ReturnsalistofknowndynamicroutesforaPakBusdataloggerthathasbeen
configuredasarouterinaPakBusnetwork.
Syntax
Routes(Dest)
SendData
SendsthemostrecentrecordfromadatatabletoaremotePakBusdevice.
Syntax
SendData(ComPort, RouterAddr, PakBusAddr, DataTable)
SendFile
SendsafiletoanotherPakBusdatalogger.
Syntax
SendFile(ResultCode, ComPort, NeighborAddr, PakBusAddr,
Security, TimeOut, "LocalFile", "RemoteFile")
SendGetVariables
SendsanarrayofvaluestothehostPakBusdatalogger,and/orretrieveanarray
ofdatafromthehostdatalogger.
Syntax
SendGetVariables(ResultCode, ComPort, RouterAddr, PakBusAddr,
Security, TimeOut, SendVariable, SendSwath, GetVariable,
GetSwath)
SendTableDef
SendsthetabledefinitionsfromadatatabletoaremotePakBusdevice.
Syntax
SendTableDef(ComPort, RouterAddr, PakBusAddr, DataTable)
SendVariables
Sendsvalue(s)fromavariableorvariablearraytoadatatableinaremote
datalogger.
Syntax
SendVariables(ResultCode, ComPort, RouterAddr, PakBusAddr,
Security, TimeOut, "TableName", "FieldName", Variable,
Swath)
StaticRoute
DefinesastaticroutetoaPakBusdatalogger.
Syntax
StaticRoute(ComPort, NeighborAddr, PakBusAddr)