Adjusting the feed amount
6. Press ◄ or ► to select Y es , and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Standard Adj.
= Y es
Note
• The following screen will be displayed when feeding paper automatically . In this case, select the
paper source, and then press the OK button.
Media Source
= Roll
A test pattern is printed for band adjustment.
After reading the pattern, the printer automatically adjusts the feed amount and returns to online
mode.
If printed documents are still af fected by uneven contrast or banding in dif ferent colors at regular
intervals after this adjustment, you can adjust the feed amount during printing. ( → P .618)
Maintenance 617
To Next Page
Loading...
