Setting Item Description, Instructions
GL2
Set-
tings
Line &
Pen
Man-
ager
AdjustFaintLines If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help produce
the expected results. However, lines in some colors
may appear broken.
Proces-
singOp-
tion
Warning Select On to have any GL2-related warnings dis-
played.
On-the-Fly Selecting On will start printing jobs sooner if you are
printing only HP RTL print jobs and printing would
not start until later. However, images may be incom-
plete in some cases, so be sure to check the printing
results.
PageSizeProcess1 Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
PageSizeProcess2 Selecting On will determine the paper size based on
the image rendering area.
GL2 Set Print Print GL2 settings information.
Inter-
face
Setup
EOP Timer Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
TCP/I
P
IPv4 IPv4 Mode Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
Proto-
col
DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
IPv4
Set-
tings
IP Address Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Subnet Mask
Default G/W
DNS
Set-
tings
DNS Dync update Specify whether DNS server registration is updated
automatically.
Pri. DNS
SrvAddr
Specify the DNS server address.
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain
Name
Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS
Set-
tings
DNS
Dync
update
State-
full
Addr
Specify whether DNS server registration is updated
automatically.
Control Panel
>
Printer Menu
>
Menu Settings
iPF755
9
746
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
