Cardinal 190 Series - Page 76

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 66
net= (NET/GROSS Key)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it.
UnLoCd
LoCD
Key is Unlocked (Enabled)
Key is Locked (Disabled)
Units= (UNITS/ Key)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it.
UnLoCd
LoCD
Key is Unlocked (Enabled)
Key is Locked (Disabled)
fUnC= (Fn/ Key)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it.
UnLoCd
LoCD
Key is Unlocked (Enabled)
Key is Locked (Disabled)
print= (PRINT Key)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it.
UnLoCd
LoCD
Key is Unlocked (Enabled)
Key is Locked (Disabled)