CS 7600_User Guide (8J4071)_Ed04 23
To allocate a tooth to a frame in the Images Display area with the Toothpicker:
1 Select a frame in the Images Display area.
2 Select a tooth in the Toothpicker.
If you wish to allocate another frame in the Images Display area:
1 Close the Toothpicker.
2 Select another frame.
3 Open the Toothpicker.
4 Select a tooth for the image.
For full instructions on how to acquire images, See “Acquiring Images” on page 52
Working with Settings
To open the settings window, click Settings.
You are presented with three tabs:
• General Settings, See page 26
• Scan & Go, See page 30
• Scanners Connections, See page 32
To Next Page
Loading...
