80 Chapter Appendix:
Scanner Setup
To open the Scanner Setup screen:
1 In the Settings Screens area, select the Scanner Setup checkbox.
2 Click Open Selected Screen.
The Scanner Setup screen opens.
Figure 3 Setup screen
The Scanner Setup screen enables you to set the following:
• Scanner Serial Number, Scanner Name, and LCD User Interface language
• Scanner Date and Time
• Backup and Restore User settings (File name is - CS7600_UserBackup.tar.gz.
Note: Scanner serial number cannot be changed.
Important: Restoring Scanner settings is to be performed under direct
supervision of a dental service engineer.
To Next Page
Loading...
