26 Chapter 3 Software Overview
Working with the General Settings Tab
To work with the General Settings tab:
1 Click Settings to open the General Settings tab.
2 In the Tooth Numbering System area, select the European or American checkbox.
3 In the Default Scan Resolution area, select the default resolution for scanning.
4 In the Default Orientation area, select the direction that the image is to be turned, clockwise or counter
clockwise.
5 In the Output Files Format area, select the JPG checkbox is you wish the images to be saved in JPEG
format as well as the default DICOM format.
6 To select a default scan resolution and filters.
a In the Image Processing area, select Soft, Standard, or Sharp for Perio.
This sets the default filter for Perio.
b Select Soft, Standard, or Sharp for Endo.
This sets the default filter for Endo.
c Select Soft, Standard, or Sharp for DEJ.
This sets the default filter for DEJ.
10 Demo Mode
This option puts the Demo Mode icon in the top left corner of the
Image Acquisition Window and populates one frame in the images display
area with a demo image each time the icon is selected.
Tip: Use for setting default presets in Adjustment mode.
11 Filters Presets This option allows you to select between Regular and High Sharpness
presets for the image filters.
12 Monitor Calibration Displays an SMPTE screen for monitor calibration.
Table 2 Image Acquisition Interface General Settings Key
Note: In the Output Files Format area, the DICOM selection box cannot be
de-selected.
Note: Continue to step 7 to select the default scan resolution from a selection
of different preview images
To Next Page
Loading...
