3-CONTROLSANDINSTRUMENTS
Grading
Usethegradingmode(1)tochangethesensitivityofthe
bladeforaspecialgradingresponse.Thisallowsthe
bladetomovewithmoreprecision.Gradingmodecannot
beusedwhenthelevelingsystemisactivated.Choose
betweenaggressive,normal,slow,orgradingbladework.
Oncepressed,themachinewilloperateingradingmode.
Pressthebuttonagainandthemachinewillreturntothe
selectedbladesensitivity.
Thegradingiconwilldisplayonthemulti-displayscreen.
Themachinespeedwilldecreaseintheprecisiongrading
mode.Returntonormaloperationbyturningthisfunction
off.
NOTE:Theimplementmustbeenabledtousethisfea-
ture.
RAPH12DOZ0082AA7
Leveling
Thelevelingsystemwillproduceadesiredgradeatapre-
setelevationand/orangle.Thesystemmustbeequipped
withanautobladecontrolsystemcompletionkit.Thehy-
draulicsselectionshouldbesetto“LvlInst”.Atthehy-
draulicsscreen,highlight“LvlInst”andpressenter/con-
rm.Followthepromptsandchangethe“LvlInst”toYes.
Thiswillallowthelevelingfunctionstowork.
RAIL12DOZ0216AA8
Thelevelingsettingcoordinatestocontrolthebladeand
createadesiredbladepositionwithextremeaccuracy.
Thelevelingsystemsettingsinterfacewiththelevelling
systemmodule.Thelevelingsystemon/offswitch(1)is
usedtoputthedozerintolevelingmode.Thisenablesthe
Auto/Manualswitch.ThemomentaryswitchfeaturesLED
toindicatethelevelingfeatureisactivated.Theblade
offsetup/downswitchwillallowforsmalladjustmentsto
thepresetelevation.
RAPH12DOZ0082AA9
NOTE:Inordertousethisfeature,theimplementmustbe
enabled,autolevelingmustbeengaged,andthebladelift
andtiltaxismustbeintheautomanualfunction.
3-34
To Next Page
Loading...
