Index
IN-25
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
spanning-tree root 3-23
Spanning Tree Specification parameter 3-27
SpectraLink NetLink phones
enabling long preambles
using the CLI
5-51
using the GUI 5-50
overview 5-50
Spectralink Voice Priority parameter 4-67
splash page web redirect 6-50
Splash Page Web Redirect parameter 6-52
SSC key-hash on Cisco WiSM 7-16
SSH, troubleshooting access points D-42
SSID
configuring
using the CLI
6-6
using the GUI 6-5
described 6-3
SSL certificate
generating
using the CLI
2-4
using the GUI 2-3
loading
using the CLI
2-6 to 2-7
using the GUI 2-5 to 2-6
SSL protocol 2-2
SSLv2, configuring for web administration 2-4
SSLv2 for web authentication, disabling 10-9
Standard Signature > Detail page 5-113
Standard Signatures page 5-111
State parameter 5-104, 5-114
Static Mobility Group Members page 12-11
Statistics option 8-40
Status parameter
for DHCP scopes
6-12
for guest LANs 10-27
for SNMP community 4-26
for WLANs 6-5
STP Mode parameter 3-25
STP Port Designated Bridge parameter 3-25
STP Port Designated Cost parameter 3-25
STP Port Designated Port parameter 3-25
STP Port Designated Root parameter 3-24
STP Port Forward Transitions Count parameter 3-25
STP Port ID parameter 3-24
STP Port Path Cost Mode parameter 3-25
STP Port Path Cost parameter 3-26
STP Port Priority parameter 3-25
STP State parameter 3-24
strong passwords 7-11
Supervisor 720
configuring
4-89 to 4-91
described 4-89
switch, configuring at the remote site 13-5 to 13-6
Switch IP Address (Anchor) parameter 12-23
SX/LC/T small form-factor plug-in (SFP) modules 3-4
symmetric mobility tunneling
configuring
using the configuration wizard
4-5
illustrated 12-27
overview 12-26 to 12-27
verifying status
using the CLI
12-28
using the GUI 12-27
Symmetric Mobility Tunneling Mode parameter 12-27
syslog
described
D-20
levels D-8
logs D-31 to D-33
Syslog Configuration page D-7
Syslog Facility parameter D-8
syslog server
number supported by controller
D-7
removing from controller D-7
severity level filtering D-7
Syslog Server IP Address parameter D-7
system logging
configuring
using the CLI
D-10 to D-12