56-5
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 56 Configuring Trend Micro Content Security
CSC SSM Setup
What to Do Next
See the “IP Configuration” section on page 56-5.
IP Configuration
The IP Configuration pane lets you configure management access for the CSC SSM, the DNS servers it
should use, and a proxy server for retrieving CSC SSM software updates.
To configure management access and other related details for the CSC SSM, perform the following
steps:
Step 1 Choose Configuration > Trend Micro Content Security > CSC Setup > IP Configuration.
Step 2 Set the following parameters for management access to the CSC SSM:
• Enter the IP address for management access to the CSC SSM.
• Enters the netmask for the network containing the management IP address of the CSC SSM.
• Enter the IP address of the gateway device for the network that includes the management IP address
of the CSC SSM.
Step 3 Set parameters of the DNS servers for the network that includes the management IP address of the CSC
SSM.
• Enter the IP address of the primary DNS server.
• (Optional) Enter the IP address of the secondary DNS server.
Step 4 (Optional) Enter parameters for an HTTP proxy server, used by the CSC SSM to contact a CSC SSM
software update server. If your network configuration does not require the CSC SSM to use a proxy
server, leave the fields in this group blank.
• Enter the IP address of the proxy server.
• Enter the listening port of the proxy server.
What to Do Next
See the “Host/Notification Settings” section on page 56-5.
Host/Notification Settings
The Host/Notification Settings pane lets you configure details about hostname, domain name, e-mail
notifications, and a domain name for e-mail to be excluded from detailed scanning.
To configure host and notification settings, perform the following steps:
Step 1 Choose Configuration > Trend Micro Content Security > CSC Setup > Host/Notification Settings.
Step 2 In the Host and Domain Names area, set the hostname and domain name of the CSC SSM.