Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

CHAPTER
58-1
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
58
Using the High Availability and Scalability Wizard
The High Availability and Scalability Wizard guides you through configuring failover with high
availability and configuring VPN cluster load balancing. This chapter includes the following sections:
• Information About the High Availability and Scalability Wizard, page 58-1
• Licensing Requirements for the High Availability and Scalability Wizard, page 58-1
• Prerequisites for the High Availability and Scalability Wizard, page 58-2
• Guidelines and Limitations, page 58-2
• Configuring Failover with the High Availability and Scalability Wizard, page 58-2
• Configuring VPN Cluster Load Balancing with the High Availability and Scalability Wizard,
page 58-9
• Feature History for the High Availability and Scalability Wizard, page 58-11
Information About the High Availability and Scalability Wizard
For more information about failover, see Information About Failover and High Availability, page 57-1.
Licensing Requirements for the High Availability and Scalability
Wizard
The following table shows the licensing requirements for this feature:
Model License Requirement
All models Base License for failover only.
ASA 5510, ASA 5520, or ASA 5540 Plus License with 3DES or AES active for VPN cluster load balancing. The security
appliance checks for the existence of this license before enabling load balancing. If
it does not detect an active 3DES license or AES license, the security appliance
prevents the enabling of load balancing and internal configuration of 3DES by the
load balancing system (unless the license permits this usage).

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English