64-29
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 64 General VPN Setup
ACL Manager
–
The VPN 3002 hardware client software is automatically updated via TFTP.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Internal Group Policy > Client Configuration Dialog Box
The Add or Edit Group Policy dialog box, Client Configuration dialog box contains three tabs that let
you configure general client parameters, Cisco client parameters, and Microsoft client parameters.
For information about the individual dialog boxes, see the following links:
• Add/Edit Internal Group Policy > Client Configuration > General Client Parameters, page 64-29
• Add/Edit Internal Group Policy > Client Configuration > Cisco Client Parameters, page 64-31
• Add or Edit Internal Group Policy > Advanced > IE Browser Proxy, page 64-32
Modes
The following table shows the modes in which this feature is available:
Add/Edit Internal Group Policy > Client Configuration > General Client Parameters
This dialog box configures client attributes that are common across both Cisco and Microsoft clients,
including the banner text, default domain, split tunnel parameters, and address pools.
Note The AnyConnect VPN client and the SSL VPN client do not support split DNS.
Fields
• Inherit—(Multiple instances) Indicates that the corresponding setting takes its value from the
default group policy. Unchecking the Inherit check box makes other options available for the
parameter. This is the default option for all attributes on this tab.
• Banner—Specifies whether to inherit the banner from the default group policy or enter new banner
text. To insert a new line in a paragraph, use the /n tag. For more information, see View/Config
Banner.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
To Next Page
Loading...
Need help?
General
