66-2
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 66 Clientless SSL VPN End User Set-up
Communicating Security Tips
Communicating Security Tips
Advise users always to log out from the session. (To log out of Clientless SSL VPN, click the logout icon
on the Clientless SSL VPN toolbar or close the browser.)
Advise users that using Clientless SSL VPN does not ensure that communication with every site is
secure. Clientless SSL VPN ensures the security of data transmission between the remote PC or
workstation and the adaptive security appliance on the corporate network. If a user then accesses a
non-HTTPS web resource (located on the Internet or on the internal network), the communication from
the corporate adaptive security appliance to the destination web server is not secure.
Configuring Remote Systems to Use Clientless SSL VPN
Features
Table 66-2 includes the following information about setting up remote systems to use Clientless SSL
VPN:
• Starting Clientless SSL VPN
• Using the Clientless SSL VPN Floating Toolbar
• Web Browsing
• Network Browsing and File Management
• Using Applications (Port Forwarding)
• Using E-mail via Port Forwarding
• Using E-mail via Web Access
• Using E-mail via e-mail proxy
Table 66-2 also provides information about the following:
• Clientless SSL VPN requirements, by feature
• Clientless SSL VPN supported applications
• Client application installation and configuration requirements
• Information you might need to provide end users
• Tips and use suggestions for end users
It is possible you have configured user accounts differently and that different features are available to
each Clientless SSL VPN user. Table 66-2 organizes information by feature, so you can skip over the
information for unavailable features.
To Next Page
Loading...
Need help?
General
