CHAPTER
66-1
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
66
Clientless SSL VPN End User Set-up
This section is for the system administrator who sets up Clientless (browser-based) SSL VPN for end
users. It summarizes configuration requirements and tasks for the user remote system. It also specifies
information to communicate to users to get them started using Clientless SSL VPN. This section includes
the following topics:
• Requiring Usernames and Passwords
• Communicating Security Tips
• Configuring Remote Systems to Use Clientless SSL VPN Features
• Capturing Clientless SSL VPN Data
Note We assume you have already configured the adaptive security appliance for Clientless SSL VPN.
Requiring Usernames and Passwords
Depending on your network, during a remote session users might have to log in to any or all of the
following: the computer itself, an Internet service provider, Clientless SSL VPN, mail or file servers, or
corporate applications. Users might have to authenticate in many different contexts, requiring different
information, such as a unique username, password, or PIN.
Table 66-1 lists the type of usernames and passwords that Clientless SSL VPN users might need to know.
Table 66-1 Usernames and Passwords to Give to Clientless SSL VPN Users
Login Username/
Password Type Purpose Entered When
Computer Access the computer Starting the computer
Internet Service Provider Access the Internet Connecting to an Internet service provider
Clientless SSL VPN Access remote network Starting a Clientless SSL VPN session
File Server Access remote file server Using the Clientless SSL VPN file browsing
feature to access a remote file server
Corporate Application Login Access firewall-protected internal server Using the Clientless SSL VPN web browsing
feature to access an internal protected website
Mail Server Access remote mail server via Clientless
SSL VPN
Sending or receiving e-mail messages
To Next Page
Loading...
Need help?
General
