73-14
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 73 Configuring SNMP
Feature History for SNMP
Application Services and Third-Party Tools
For information about SNMP support, see the following URL:
http://www.cisco.com/en/US/tech/tk648/tk362/tk605/tsd_technology_support_sub-protocol_home.htm
l
For information about using third-party tools to walk SNMP Version 3 MIBs, see the following URL:
http://www.cisco.com/en/US/docs/security/asa/asa83/snmp/snmpv3_tools.html
Feature History for SNMP
Table 73-2 lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 73-2 Feature History for SNMP
Feature Name
Platform
Releases Feature Information
SNMP Versions 1
and 2c
7.0(1) Provides adaptive security appliance network monitoring and event information by
transmitting data between the SNMP server and SNMP agent through the clear text
community string.
The following screen was introduced:
Configuration > Device Management > Management Access > SNMP.
SNMP Version 3 8.2(1) Provides 3DES or AES encryption and support for SNMP Version 3, the most secure
form of the supported security models. This version allows you to configure users,
groups, and hosts, as well as authentication characteristics by using the USM. In
addition, this version allows access control to the agent and MIB objects, and
includes additional MIB support.
The following screen was modified:
Configuration > Device Management > Management Access > SNMP.
Password encryption 8.3(1) Supports password encryption.
To Next Page
Loading...
Need help?
General
