74-4
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 74 Configuring Smart Call Home
Licensing Requirements for Smart Call Home
• For hourly subscription, specify the minute of the hour to send the information. If it is not specified,
the adaptive security appliance chooses an appropriate value for it. Hourly subscription is only
applicable to the snapshot and telemetry alert groups.
b. Click the Basic or Detailed radio button to provide the desired level of information to subscribers.
c. Click OK when you are done.
Step 7 For diagnostic, environment, and threat event-based alerts, in the Alert Dispatch area, click Add or Edit
to display the Create or Edit Diagnostic Alert Dispatch Condition dialog box.
Step 8 Specify the event severity that triggers dispatch of the alert to subscribers in the Event Severity
drop-down list, and then click OK.
Step 9 For inventory time-based alerts, in the Alert Dispatch area, click Add or Edit to display the Create or
Edit Inventory Alert Dispatch Condition dialog box.
Step 10 Specify how often to dispatch alerts to subscribers in the Alert Dispatch Frequency drop-down list, and
then click OK.
Step 11 For snapshot time-based alerts, in the Alert Dispatch area, click Add or Edit to display the Create or
Edit Snapshot Alert Dispatch Condition dialog box.
a. In the Alert Dispatch Frequency area, specify the frequency in which to send the information to
subscribers:
–
For monthly subscription, specify the day of the month, as well as the time of the day to send
the information. If they are not specified, the adaptive security appliance chooses appropriate
values for them.
–
For weekly subscription, specify the day of the week, as well as the time of the day to send the
information. If they are not specified, the adaptive security appliance chooses appropriate
values for them.
–
For daily subscription, specify the time of the day to send the information. If it is not specified,
the adaptive security appliance chooses an appropriate value for it.
–
For hourly subscription, specify the minute of the hour to send the information. If it is not
specified, the adaptive security appliance chooses an appropriate value for it. Hourly
subscription is only applicable to the snapshot and telemetry alert groups.
–
For interval subscription, specify how often, in minutes, the formation is sent to the subscribers.
This requirement is only applicable to the snapshot alert group.
b. Click OK when you are done.
Step 12 For syslog event-based alerts, in the Alert Dispatch area, click Add or Edit to display the Create or Edit
Syslog Alert Dispatch Condition dialog box.
a. Check the Specify the event severity which triggers the dispatch of alert to subscribers check
box, and choose the event severity from the drop-down list.
b. Check the Specify the message IDs of syslogs which trigger the dispatch of alert to subscribers
check box.
c. Specify the syslog message IDs that trigger dispatch of the alert to subscribers according to the
on-screen instructions.
d. Click OK when you are done.
Step 13 For telemetry event-based alerts, in the Alert Dispatch area, click Add or Edit to display the Create or
Edit Telemetry Alert Dispatch Condition dialog box.
a. In the Alert Dispatch Frequency area, specify the frequency in which to send the information to
subscribers:
To Next Page
Loading...
Need help?
General
