32-5
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 32 Configuring Management Access
Configuring File Access
Step 1 Choose the Configuration > Device Management > Management Access > CLI Prompt pane, do any
of the following to customize the prompt:
• To add an attribute to the prompt, click the attribute in the Available Prompts list and then click Add.
You can add multiple attributes to the prompt. The attribute is moved from the Available Prompts
list to the Selected Prompts list.
• To remove an attribute from the prompt, click the attribute in the Selected Prompts list and then click
Delete. The attribute is moved from the Selected Prompts list to the Available Prompts list.
• To change the order in which the attributes appear in the command prompt, click the attribute in the
Selected Prompts list and click Move Up or Move Down to change the order.
The prompt is changed and displays in the CLI Prompt Preview field.
Step 2 Click Apply.
The new prompt is saved to the running configuration.
Changing the Console Timeout Period
To change the console timeout period, or the duration of time the management console remains active
before automatically shutting down, perform the following steps.
Detailed Steps
Step 1 Choose the Configuration > Device Management > Management Access > Command Line (CLI) >
Console Timeout pane, add a new timeout value in minutes.
To specify unlimited, enter 0. The default value is 0.
Step 2 Click Apply.
Configuring File Access
This section includes the following topics.
• Configuring the FTP Client Mode, page 32-6
• Configuring the Adaptive Security Appliance as a Secure Copy Server, page 32-6
• Configuring the Adaptive Security Appliance as a TFTP Client, page 32-6
• Adding Mount Points, page 32-7
To Next Page
Loading...
Need help?
General
