32-20
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 32 Configuring Management Access
Configuring AAA for System Administrators
Figure 32-1 Permitting All Related Commands
• For commands that are a single word, you must permit unmatched arguments, even if there are no
arguments for the command, for example enable or help (see Figure 32-2).
Figure 32-2 Permitting Single Word Commands
•
To disallow some arguments, enter the arguments preceded by deny.
For example, to allow enable, but not enable password, enter enable in the commands field, and
deny password in the arguments field. Be sure to check the Permit Unmatched Args check box so
that enable alone is still allowed (see Figure 32-3).
To Next Page
Loading...
Need help?
General
