EasyManua.ls Logo

Cisco ASR 9000 Series

Cisco ASR 9000 Series
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Example: Configuring L3VPN iBGP PE-CE
The following example shows how to configure L3VPN iBGP PE-CE:
R1(config-bgp-vrf-nbr)#neighbor 10.10.10.1 ?
. . .
internal-vpn-client Preserve iBGP CE neighbor path in ATTR_SET across VPN core
. . .
R1(config-bgp-vrf-nbr)#neighbor 10.10.10.1 internal-vpn-client
router bgp 65001
bgp router-id 100.100.100.2
address-family ipv4 unicast
address-family vpnv4 unicast
!
vrf ce-ibgp
rd 65001:100
address-family ipv4 unicast
!
neighbor 10.10.10.1
remote-as 65001
internal-vpn-client
The following is an example of the output of the show bgp vrf vrf-name neighbors ip-address command
when the L3VPN iBGP PE-CE is enabled on a CE peer:
R1#show bgp vrf ce-ibgp neighbors 10.10.10.1
BGP neighbor is 10.10.10.1, vrf ce-ibgp
Remote AS 65001, local AS 65001, internal link
Remote router ID 100.100.100.1
BGP state = Established, up for 00:00:19
. . .
Multi-protocol capability received
Neighbor capabilities:
Route refresh: advertised (old + new) and received (old + new)
4-byte AS: advertised and received
Address family IPv4 Unicast: advertised and received
CE attributes will be preserved across the core
Received 2 messages, 0 notifications, 0 in queue
Sent 2 messages, 0 notifications, 0 in queue
. . .
The following is an example of the output of the show bgp vpn4/vpn6 unicast rd command when the L3VPN
iBGP PE-CE is enabled on a CE peer:
BGP routing table entry for 1.1.1.0/24, Route Distinguisher: 200:300
Versions:
Process bRIB/RIB SendTblVer
Speaker 10 10
Last Modified: Aug 28 13:11:17.000 for 00:01:00
Paths: (1 available, best #1)
Advertised to update-groups (with more than one peer):
0.2
Path #1: Received by speaker 0
Advertised to update-groups (with more than one peer):
0.2
Local, (Received from a RR-client)
20.20.20.2 from 20.20.20.2 (100.100.100.2)
Received Label 24000
Origin IGP, localpref 100, valid, internal, best, group-best, import-candidate,
not-in-vrf Received Path ID 0, Local Path ID 1, version 10
Extended community: RT:228:237
ATTR-SET [
Origin-AS: 200
AS-Path: 51320 52325 59744 12947 21969 50346 18204 36304 41213 23906 33646
Origin: incomplete
Metric: 204
Local-Pref: 234
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
134
Implementing BGP
L3VPN iBGP PE-CE

Table of Contents

Other manuals for Cisco ASR 9000 Series

Related product manuals