Cisco ASR 9000 Series Routing Configuration Guide

Where DocumentedIntroduced/Changed in
Release
DescriptionFeature
Dynamic ECMP chapter
Implementing IS-IS, on
page 341
Refer IS-IS Commands
and OSPF Commands
chapter in
Cisco ASR 9000 Series
Aggregation Services
Router Routing Command
Reference for commands
to configure 64 ECMP
paths.
Release 5.3.0This feature was
introduced.
64 ECMP
Echo Timer configuration
for BFD on Bundle
Interfaces chapter
Echo Timer configuration
for BFD on Bundle
Interfaces, on page 247
Release 5.3.0This feature was
introduced.
Echo Timer
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
3
New and Changed Routing Features
New and Changed Routing Feature Information

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model