EasyManuals Logo

Cisco ASR 9000 Series Routing Configuration Guide

Cisco ASR 9000 Series
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #350 background imageLoading...
Page #350 background image
PurposeCommand or Action
Specifies the AS number of the routing process to
configure an EIGRP routing process.
router eigrp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router eigrp 100
Step 2
Enters an address family configuration mode.address-family { ipv4 }
Example:
RP/0/RSP0/CPU0:router(config-eigrp)# address-family
ipv4
Step 3
Redistributes the routes from the specified protocol
and AS number to the EIGRP process. Optionally,
redistribute {{ bgp | connected | isis | ospf | rip | static
} [ as-number ]} [ route-policy name ]
Step 4
the redistributed routes can be filtered into the EIGRP
process by providing the route policy.
Example:
RP/0/RSP0/CPU0:router(config-eigrp-af)# redistribute
bgp 100
Limits the maximum number of prefixes that are
redistributed to the EIGRP process.
redistribute maximum-prefix maximum [ threshold ] [[
dampened ] [ reset-time minutes ] [ restart minutes ] [
restart-count number ] | [ warning-only ]]
Step 5
Example:
RP/0/RSP0/CPU0:router(config-eigrp-af)# redistribute
maximum-prefix 5000 95 warning-only
Sets the timer that determines how long an
NSF-aware EIGRP router holds routes for an inactive
peer.
timers nsf route-hold seconds
Example:
RP/0/RSP0/CPU0:router(config-eigrp-af)# timers nsf
route-hold 120
Step 6
Controls the maximum number of parallel routes that
the EIGRP can support.
maximum paths maximum
Example:
RP/0/RSP0/CPU0:router(config-eigrp-af)# maximum paths
10
Step 7
Limits the number of prefixes that are accepted under
an address family by EIGRP.
maximum-prefix maximum [ threshold ] [[ dampened ] [
reset-time minutes ] [ restart minutes ] [ restart-count
number ] | [ warning-only]]
Step 8
Example:
RP/0/RSP0/CPU0:router(config-eigrp-af)#
maximum-prefix 50000
commit
Step 9
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
320
Implementing EIGRP
Redistributing Routes for EIGRP

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals