Cisco ASR 9000 Series Routing Configuration Guide

Document TitleRelated Topic
Implementing MPLS Traffic Engineering on Cisco
ASR 9000 Series Router module in the
Cisco ASR 9000 Series Aggregation Services Router
MPLS Configuration Guide
Site of Origin (SoO) support for RIP feature
information
Cisco ASR 9000 Series Aggregation Services Router
Getting Started Guide
Cisco IOS XR getting started documentation
Configuring AAA Services on Cisco ASR 9000 Series
Router module in the Cisco ASR 9000 Series
Aggregation Services Router System Security
Configuration Guide
Information about user groups and task IDs
Standards
TitleStandards
—
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
MIBs
MIBs LinkMIBs
To locate and download MIBs using Cisco IOS XR
software, use the Cisco MIB Locator found at the
following URL and choose a platform under the Cisco
Access Products menu:
http://cisco.com/public/sw-center/netmgmt/cmtk/
mibs.shtml
—
RFCs
TitleRFCs
RIP Version 2RFC 2453
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
539
Implementing RIP
Additional References

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model